USA Tel: (201) 880-0366 | | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977

SRM_066195A_001.jpg (29373 bytes) SRM_71-2370_001.jpg (7237 bytes)
Pressure Release Valve Fitting Instructions

Ensure the area around the valve is clean.
Unscrew the old valve from the casing.
Check that the threads and the mating face of the crankcase are clean.
Screw in the new SRM Pressure Relief Valve, until the fiber washer touches the casing.
Torque the valve to 20ft/lb or 27Nm or 1/6th of a turn.
Start your engine and check for any leaks.

Hit Counter