Carburetor Manifold Adaptor Kits
USA Tel: (201) 880-0366 | info@britcycle.com | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977

Carburetor Manifold Adaptor Kits

Part Number Description Sold As
70-3006 Race Intake Manifold T100

70_3006_001.jpg (31060 bytes)

651- 01 1 MK2/Mikuni 36-38, Commando Individual 
651- 02 1 MK2/Mikuni 30-34, Commando Individual 
651- 03 1 Concentric, Pre Commando Individual 
651- 04 1 Conc. or Mono., Commando Individual 
651- 05 1 Mikuni, Pre Commando, 30-34mm Individual 
651- 09 1 MK2/Mikuni, TR6 or TR7 Individual 
651- 10/ER Rubber, Flanged 30-34mm, Econo
651- 11 Rubber, Flanged 36-38mm Individual 
651- 12 Rubber, Flanged 26-28mm Individual 
651- 13 Pre 69 Bonnie, MK2/Mikuni, 20 TPI Pair
651- 14 69-71 T120, MK2/Mikuni, 16 TPI Pair
651- 25 Bolton, Mikuni/Amal MK2 Individual 
651- 26 Commando, Dual MK2 Pair
651- 26/A Commando, Dual Mikuni Pair
691-2928119 Carb Adaptor  Individual
651-30 Mikuni/MK2 Rubber/Metal Flange to Spigot Adaptors
651-41 Alloy Carb Spacer Block
Thick alloy carb spacer helps increase intake tract length for fine tuning any intake with standard 2 inch bolt pattern, or to replace original spacers as used on Norton Atlas, etc.

651_41_001.jpg (18760 bytes)

651-41/A Alloy Carb Spacer Block, Finned
651-42 Manifold Spacer, Finned, Cast Alloy
651-51 DUAL INTAKE MANIFOLD W/ HARDWARE
For those who wish to convert their single carb Triumph TR6 or TR7 to twin carbs with no modifications, this intake manifold, complete with everything required except for the second carb and cables, is the way to go.