USA Tel: (201) 880-0366 | info@britcycle.com | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977

LUG, CAST, SIDESTAND, WELD ON, 1", REPLACEMENT

Part Number 83-0035

This stand pivot lug is designed to use the 83-1560 stand as used on 1968 on Triumph twins, all Triumph/BSA triples, and on 1971 and later BSA twins, which can be supplied by BCS along with the correct bolt, nut, and spring if required.

While one inch is the nominal size for this weld on clamp, it can be comfortably adapted to 7/8" through 1-1/4” tubes, since as you can see from the illustration it is rather “universal” in construction and can be fit satisfactorily to your frame by a good welder with a bit of care.

To be welded to the frame tube to replace broken or damaged stock lug. Use with bolt 82-7021, nut 14-0703, spring 82-8382, sidestand 83-1560.

 

 

 

83-0035/D/A - Weld-on Sidestand Mounting Lug For Pre-Unit Triumphs - CURRENTLY UNAVAILABLE

Fully machined, and has a replaceable allen bolt for a spring lug instead of the stock pin.



83-0035/A - Clamp-on Sidestand Mounting Lug - CURRENTLY UNAVAILABLE

Our clamp-on lug is currently unavailable. Please use weld-on type.
For unit Triumph 650 frames, clamps to frame tubes and uses the stock sidestand.