|
Factory Service Tools |
|
| Part Number Description Sold As |
Thumb |
| 222-01 Wrench, X collar, T140D, Triumph |
|
222-02 Tool, clutch locking, Hayward, TriBSA twins |
|
222-04 Tool, exhaust spigot, Triumph Twins & Triples |
|
| 222-05 - TOOL, CONROD LOCKING, TRIUMPH/BSA TWINS |
|
| 222-07 - Carb Air and Mixture Screw O-Ring Installation Tool |
 |
| 222-08 - Universal Points Seal installation Tool |
 |
| 222-11 & 222-12 - TOOL, INTAKE MANIFOLD, T120 |
 |
222-060934 Puller, auto advance, Commando |
|
| 222-060942 Spanner, pre 71 Norton, strg. brg |
|
| 222-060949 Tool, auto advance, locking, Norton |
|
| 222-061015 - Tool, Clutch Locking, Commando, With Handle |
 |
| 222-061359 Tool, points seal guide, CEI |  |
| 222-063965 Spanner, Norton caliper & wheel |
|
| 222-063965/B TOOL, NORTON CALIPER PLUG, HEX |
 |
| 222-063970 Puller, bearing, hydraulic, Norton | |
| 222-063971 Tool, insertion, isolastics, Norton |  |
| 222-064292 Drift set, t/cov. seals, Norton |
|
| 222-064297 Puller, eng, cam sprocket & cl., Commando |  |
| 222-066473 Tool, timing, Norton 850 Mk3 |
|
| 222-066532 Tool, adjusting, isolastics, Mk3, Norton |
|
| 222-067185 Tool, rockershaft alignment, Norton |  |
| 222-067227 Tool, clutch locking, Norton, pre Commando |  |
| 222-106 Tool, clutch compressor, Bantam, BSA |
|
| 222-108 Puller, magneto pinion, BSA manual advance |  |
| 222-109 Tool, clutch puller, Cub, Triumph |  |
| 222-110 Puller, clutch, 20tpi, Triumph, BSA twin |  |
| 222-117 Puller, clutch, BSA, internal threaded |  |
| 222-118 Puller, flywheel, Bantam, BSA |  |
| 222-121 Puller, clutch, Triumph, BSA 1cyl, Cub pinion |  |
| 222-127 Puller, clutch, 26tpi Triumph, BSA twin |  |
| 222-1320 Puller, engine sprocket, T120/T140, etc, Triumph |
|
| 222-1330 Puller, engine sprocket, 3 cyl, BSA/TRI |
|
| 222-155 Puller/replacer, camgear, Triumph 2 & 3 cyl, early |
|
| 222-156 Puller, engine sprocket, Norton, pre Commando |
|
|
222-158
Puller, crank pinion Norton twins, all Triumph twins and triples, except unit 350/500 twins and TRW 500. |
|
| 222-158/A Puller, crank pinion, Triumph, early style |  |
| 222-158/BOLT Bolt, centre, 222-158 puller |
|
| 222-158/JAWS Jaw, to repair 222-158 tool | |
| 222-162 Puller, clutch, Norton, pre Commando |  |
| 222-167 USE 222-117 | |
| 222-168 - TOOL, CLUTCH COMPRESSOR, COMMANDO |
 |
| 222-170 Puller, eng. sprocket & clutch, Commando |  |
| 222-171 USE 222-198 | |
| 222-179 Tool, pushrod comb, A7 & A10, BSA |  |
| 222-180 Tool, clutch. spring adjuster, small |  |
| 222-180/A Tool, clutch. spring adjuster, heavyduty |  |
| 222-180/B - T-Handle Clutch Spring Adjusting Tool |
 |
| 222-181 Extractor, gudgeon pin |
|
| 222-183 Wrench, X collar, Norton Twin |  |
| 222-183/A - WRENCH, EXHAUST COLLAR & PRIMARY COVER INSPECTION CAP, NORTON TWIN, SQUARE DRIVE |
 |
| 222-186 Tool, Norton clutch release retaining ring |
|
| 222-186/A - Tool, Norton Clutch Release Retaining Ring, Genuine |
 |
| 222-188 USE 221-188 | |
| 222-189 Puller, rocker spindle, Norton |
|
| 222-190 Puller, auto advance unit |
|
| 222-191 221-191 Front Forktube Puller with seven adaptors does all British telescopic forktubes |
|
| 222-192 Puller, clutch hub, Triumph/BSA triples |  |
| 222-198 Puller, crank bearing |
|
| 222-200/B Tool, forkseal installation & removal, BSA | |
| 222-231 Socket, 1" BSW, gearbox nut, Triumph 4 speed |
 |
| 222-234 Socket, 7/8" BSW, Norton/BSA gearbox nut |
|
| 222-236 Tool, forkseal holder, PreUnit, Triumph |  |
| 222-260 Socket, front brake plate, 1x1-1/8" |
|
| 222-290 Adaptor assembly, degree wheel, CEI crank |
|
| 222-291 Adaptor assembly, degree wheel, UNF crank |
|
| 222-296 Cambush line reaming kit, T120/140, Triumph |  |
| 222-296/A Cambush sizing kit, unit 350/500, Triumph |  |
| 222-296/D CAMBUSH LINE REAMING SET, TRIUMPH OHV TWINS, ALL Consists of the 222-296 kit with the adaptor for the 500. NEW MASTERKIT! | |
| 222-305 Drift, for bar bush 97-1527 |
|
| 222-307 Tool, indexing, 5 speed gearbox, Triumph |
|
| 222-308 Tool, slotted inspection cap, TRIUMPH/BSA |
|
| 222-308/A TOOL, SLOTTED INSPECTION CAP, HEX |
 |
| 222-311 Drift, for forkseal 97-4001, Tri/BSA | |
| 222-319 Drift, for bearing 57-1606 & 1614 |
|
| 222-600496 USE 222-602108 | |
| 222-600571/0572 Tool, timing, pre 69 Triumph Twin |  |
|
222-600605
Timing disc kit, points, 26 TPI 222-600605/A Timing disc kit, points, 28 TPI |
 |
| 222-601825 Timing plate, 68 T100/120 style |  |
| 222-601858 Tool, timing, Triumph/BSA triple | |
| 222-601859 Tool, timing, 69 Triumph/BSA 1&2 cylinder |  |
| 222-601862 Puller, chainwheel, Triples |  |
| 222-601865 - Tool, Throttle Rod Assembly, Triples |
 |
| 222-602020 Tool, valve adjusting, Triumph | |
| 222-602020/A Tool, valve adj. Tri/BSA CEI, STUBBLEFIELD |  |
| 222-602020/B Tool, valve adj. Tri/BSA UNF, STUBBLEFIELD | |
| 222-602108 Tool, primary adjusting, Triumph, Unit Twin |
|
| 222-602135 Spanner, release valve, Triples |  |
| 222-602211/2212 Tool, baffle plate, Triples | |
| 222-602218 Tool, drift, lower steering bearing | |
| 222-607041 Tommy bar, rear wheel |
|
| 222-613005 Tool, forkseal holder, BSA |  |
| 222-613006 Drift, BSA, forkseal removal | |
| 222-613007 Drift, BSA forkseal installation | |
| 222-613008 Tool, adjusting, steering bearing, BSA to 68 | |
| 222-613063 Puller, steering. bearing, BSA pre 71 | |
| 222-613222 BSA Plunger Frame Suspension Tool |
|
| 222-613256 Pullers, BSA master set | |
| 222-613503 Tool, shock spring installation, BSA type |
|
| 222-613585 Jaws, oilpump gear puller, C15/B40 |  |
| 222-613606/A Tool, bottom nut, forks, pre 71 type |  |
| 222-613702 Tool, tappet circlip installation, A50/A65 |
|
| 222-613760 Tool, clutch locking, 62-65, A50/65, BSA | |
| 222-613768 Tool, clutch locking, Triumph & BSA Twin, late |
|
| 222-613768/A Tool, clutch locking, BSA, 6 spring |
|
| 222-613769 Jaws, oilpump gear puller, C/B25/44 |  |
| 222-613774 Tool, clutch locking, Triumph/BSA 1 cyl |  |
| 222-616002 Tool, engine lifting, Triples |
 |
| 222-616008 Tool, drift, tappet blocks, Triumph |  |
| 222-616010 Reamer, highgear, Tri 4 speed | |
| 222-616017 Spanner, Fork Seal Holders |
 |
| 222-616020 Drift, RH crank bearing, Triple |
|
| 222-616021 Drift, LH crank bearing, Triple |
|
| 222-616024 Tool, crank pinion rep, 3 cylinder |
|
| 222-616025 Tool, fork guage plate |  |
| 222-616026 Drift, highgear, 4 speed Triumph/BSA |
|
| 222-616042 Tool, clutch alignment, Triples |
 |
| 222-616046 USE 222-1320 | |
| 222-616050 Drift, for swingarm bush 82-6042 |
 |
| 222-616051 Tool, guide, pullrod seal |
|
| 222-616059 Tool, tap. block drill, 3 cyl | |
| 222-616060 Puller, outer race, LH crank, T100R type |  |
| 222-616061 Socket, 4th gear, 4speed Triple | |
| 222-616070 Tool, clutch locking, Triples | |
| 222-616103 Tool, primary alignment support 3cyl | |
| 222-616105 Guage, primary alignment, Triples | |
| 222-616113 Tool, late fork damper assembly |  |
| 222-616117 Tool, for swingarm bushing #83-2521 | |
| 222-616121 Drift, steering head bearings, OIF |
|
| 222-616125 Socket, sprocket nut, 5 speed, Triumph |
|
| 222-616132 Puller, camwheel, 2 Bolt Type |
|
| 222-617010 Tool, cyl. head nut, T140 |
|
| 222-617013 Tool, points seal guide, UNF |
|
| 222-617017 Puller, outer race, LH crank |  |
| 222-617019 Tool, rocker shaft oring |
|
| 222-617019/A Tool, rocker shaft oring, unit 500 |
|
| 222-617024 Spanner, wheel bearing. retainer |
|
| 222-622104 Tool, Amal mainjet socket |
|
| 222-680710 Tool, timing, pre 69 A50/65 |
|
