BCS #544-800/A
BSA A50/A65 Hardtail Frame
544-800/A - 30 degree rake; 544-800 - 38 degree rake
Stretched approximately 2" in front and 4" in the rear
Based on the
Triumph hardtail frame 544-700; measures 7-9/16" between axle carriers; use
oil-in-frame neck bearings 97-4031 for 3/4" stem; if used with our springers the
544-800/A frame will sit level with the standard
546-96 springer and the 544-800 frame will sit level with the 546-96/6 6"
over springer in most cases.
(Click on the thumbnails to see full size pictures. )
Please bear in mind that all tail sections and frames we sell for British bikes are manufactured with some offset to reflect the run of the rear chain, and thus are not intended to be symmetric. In addition, due to slight warpage caused by cooling after manufacture, long storage, and shipping, it is not unheard of for frames or tail sections to require some slight alignment during assembly of the motorcycle. As all of these items are made of mild steel which is quite malleable, this should not be much trouble to affect, and does not indicate a faulty frame or tail section, just normal manufacturing tolerances for this type of product.