WIRES, STARTER, BATTERY & RELAY, HEAVYDUTY, LONG
Part Number 06-5909/10/11/B
DynoDave
MK3 Commando electric starter cable upgrade, three wire set.
A must have for any MK3 Commando.
Manufacturer's Comments:
The originals are 10 gauge .025ohms.
The upgraded cables are 6 gauge fine strand and more flexible than
original cables. The resistances is almost 1/3 of originals at .010ohms.
The original electric battery is shown in the shop manual with the terminals
facing the rear of the bike. I have found difficulty fitting the heavy
ground cable in this configuration. I offer a longer 06-5911 ground (red) cable
if so desired. Please mention it when you order. It is about 25.5" long instead
of the stock 22.5". If you mount the terminals forward then order the short
cable.
If you decide to make your own cables, don't be foolish and forget you need all
three cables. You must put a fat ground cable to get the full benefit.