USA Tel: (201) 880-0366 | info@britcycle.com | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977


905-2212C-50/A Morgo Oil Pump 
Ariel 350/500/600 Singles 


The new Morgo rotary oil pump will fit all 350,500 and 600cc single cylinder engines. No modification is required to the engine casings or cycle parts. It should be noted that the camshaft must be modified to allow the fitting of this pump.

Why should I buy a new Morgo Ariel Super Rotary Pump? To put the matter into simple terms it is all about quality, efficiency, reliability, heat, and peace of mind.

QUALITY

All Morgo products are manufactured to a very high standard from the best materials available at the time. All Rotary pumps are run and fully tested on our test rigs, for feed from oil tank vacuum, pump to engine delivery pressure continuity, scavenge vacuum, and for scavenge to feed delivery differential achievement performance.

EFFICIENCY AND RELIABILITY

The new Morgo super Rotary pump is capable of delivering a much greater flow when the oil is hot. A Rotary pump of the new type will still pump oil adequately when the oil is in a very contaminated condition, and the pump is very worn. Normally wear on the small gears used in most British motorcycle oil pumps has a dramatic effect on pumps performance, and reduces the pumps working pressure, scavenge, or both. This resulting in either reduced oil pressure or the crank case oil level being too high.

HEAT - THE ENGINES ENEMY

It has been reported back to us by customers that they have noticed a significant decrease in engine temperature. This can only be attributed to the greater oil flow, establishing that the oil is doing a better job of both lubricating and cooling the engine.


WHAT'S IN THE KIT

1 Rotary pump.
1 Drive nut.
1 Drive coupling.
1 Gasket.
4 Shims.
2 Bolts.
1 Allen key.


Instructions (pdf)

Hit Counter