USA Tel: (201) 880-0366 | | Fax (902) 542-7479 | Canadian Tel: (902) 542-7478
Helping keep British Motorcycles on the road for over 30 years - established 1977


Part Number 84-0027

Made in England. Requires two of 83-2829 gasket.

Straight swap for earlier, and catches much more sludge. Can only be used on bikes fitted with alloy sump plate that has the feed line to pump coming off it. This has a “sludge dam”, i.e. non-screened area at the bottom, so dirt does not clog screen or drift through it.

Only for 1973 and later Triumph oil frame twins – not for 650. Unless the 650 oilframe has been modified to take the 750 style sump plate with the oilfeed to engine coming off it.